Profile

On Leave

Md Shazib Uddin

Shazib

Assistant Professor

  •  Room No:  On leave
  •  Phone:   880-721750219
  •  PABX:   (880)-721750742 Ext. 201 or 203 (Office)
  •  Email:   shazib0397@gmail.com
  • st113320@alumni.ait.asia
    msu@me.ruet.ac.bd
  •  Website:   Md Shazib Uddin

Biography

Md. Uddin is a Bangladeshi citizen by birth. His father is a retired school teacher and his mother is a housewife. He completed Secondary School Certificate (S.S.C) from Elong Jani High School in 2001 and Higher Secondary Certificate (H.S.C) from Rajshahi Govt. City College in 2003. Then he successfully admitted at RUET in the Department of Mechanical Engineering for undergraduate study (4 years program) and received B. Sc. Engineering Degree in 2008. After awarded the Bachelor's degree he was appointed as a faculty member (Lecturer) in the same department of RUET in 2008. After 3 years of professional service, he has received a scholarship for a Master's degree study at the Asian Institute of Technology (AIT), Thailand in 2011 and awarded the degree (M. Engg.) in 2013. After completing the Master's degree he return and joins in the department for quality service in 2013 and promoted in the rank of Assistant Professor. He was additionally appointed as a Deputy Sub Project Manager (DSPM) of a Higher Educational Quality Enhancement Project (HEQEP) (World Bank Project) in the same department from 01/07/2014 to 30/06/2017 (3 years). Successful completion of this research project directed him to be a strong researcher and contribute to solve the emerging problems in the world and to establish a better environment for mankind in line with the research expertise. This encouragement has guided him to enroll in a Ph.D. study in a world rank institution with international scholarship. Currently, he is conducting Ph. D. study (Mechanical engineering) in an Australian Leading University to innovate new for mankind. Md. Uddin formally introduced with the research world through group research title “Engine performance and emission assessment using diesel and diesel-biodiesel blends” conducted during the undergraduate study. Then his research skill has to boost up through independent research title “Life cycle energy and emission analysis of solar (thermal and photovoltaic) and wind technologies” during Master study at AIT. Currently, he is working on “Development of next-generation turbine technology for Concentrating Solar Thermal power using Supercritical CO2 Cycles” as the broad topic of his Ph.D. research. During his professional period and until today he has contributed on 16 peer-reviewed journal papers and 20 international conference papers.

Research Topic in Degree Level  

M. Engineering: Life Cycle Analysis of Solar (Thermal and Photovoltaic) and  Wind Technologies

B. Sc Engineering: Production of Biodiesel from Non-edible Renewable Pitraj (Aphanamixis Polystachya) oil and Performance and Emission Study of a Diesel Engine  with Diesel and Diesel-Biodiesel Blends.

Research Paper Published on 

Contributed on the following area of Research paper have been published: 

(A) Life cycle analysis (LCA)    

→Life cycle energy and GHG analysis of Photovoltaic (PV) panel, Solar thermal and Wind Technologies  

→Life cycle analysis of earth to air heat exchanger 

(B) Energy and Environment     

→Household energy and GHG analysis  

→Embodied energy and GHG emission   

→ Energy security assessment

→ Energy and carbon footprint assessment of university vehicle, jute product, brick manufacture  

 → Design and construction of light weight travelling mosquito net, simple viscometer for incompressible fluid, material picking and handling robot 

(C) Energy Efficiency     

→Energy efficiency measures on building appliances   

(D) Solar Energy      

→Construction and performance analysis of rock bed integrated solar air heater

→Feasibility study of solar-wind-diesel hybrid system 

→Feasibility study of solar charging station for charging auto rickshaw 

→Solar power prototype vehicle    

(E) Pyrolysis       

→Plum seed, Pine seed, Mehogony seed, Date seed, sugar cane bagasse  pyrolysis for bio-oil production 

→Comparative pyrolysis study for different biomass solid waste 

(F) Biodiesel        

→Biodiesel from pitraj oil, waste cook, peanut, karamja and engine performance with blend 

→Biodiesel from jatropha curcas

Current Status


On leave for higher study

Field of Research
  •  Advanced Research Tools Expertise: ANSYS (Fluent), COMSOL, Python, CoolProf, SimaPro (LCA), GIS software, SPSS (introductory), MatLab (Introductory)
  •  Climate change: GHG Emission and Environmental Impact Assessment
  •  Technology: Research on Solar PV, Solar Thermal, Wind turbine, Super critical CO2 turbine, Pyrolysis, Biodiesel
  •  Energy: Embodied energy, Modern energy, Energy security, Energy efficiency analysis
  •  Life cycle analysis (LCA)

  •  First Joined: 01st Jul, 2008
  •      Dept. of Mechanical Engineering

Position

Education

Book / Book Chapter
0
Journal Articles
17
Conference Papers
22
SL Authors Title Publisher Details Publication Year Type
1 Jishun Li, Hal Gurgenci, Zhiqiang Guan, Jun Li, Md. Shazib Uddin, Lun Li BEARING AND SEAL SELECTION FOR A HIGH-TEMPERATURE SUPERCRITICAL CO2 TURBINE Proceedings of Global Power and Propulsion Society (Beijing Conference) 2019 Conference
2 Md. Shazib Uddin, SK Shamim Iqbal and Md. Talukdar Household Energy and Environmental Analysis to Highlight the Impact of Modern Energy Access in Bangladesh Taylor and Francis Group 2017 Journal
3 Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module [Accepted for Journal] International Journal of Mechanical Engineering and Automation 2017 Journal
4 Md. Shazib Uddin, Soumya Mondal and Md. Fajle Rabbi Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh Journal of Nature Science and Sustainable Technology 2017 Journal
5 Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December 2017 Conference
6 Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika Design And Construction of a Light Weight User Friendly Travelling Mosquito Net Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December 2017 Conference
7 Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December 2017 Conference
8 Md. Shazib Uddin, A. N. Faisal Ahmed, Sayeed Ahmmed Assessment of Energy Security Snapshot in Developing Country Bangladesh Journal of Environmental Science, Toxicology and Food Technology 2016 Journal
9 Md. Shazib Uddin and Mahadi Hasan Masud A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus International Journal of Advanced Renewable Energy Research 2016 Journal
10 Md. Shazib Uddin, Raju Ahmed, Masudur Rahman Performance Evaluation and Life Cycle Analysis of Earth to Air Heat Exchanger in a Developing Country Energy and Buildings 2016 Journal
11 Md. Shazib Uddin, Masud Parvez and Md. Enamul Haque. Construction and Performance Study of a Rock Bed Integrated Green House Type Solar Air Heater with Solar Dryer Journal of Environmental Science, Toxicology and Food Technology 2016 Journal
12 Md. Shazib Uddin, Amit Roy, Manjur Morshed, Soumya Mondal and Md.Fajle Rabbi Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh International Conference on Petroleum Engineering 2016 (ICPE-2016) 2016 Conference
13 Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December 2016 Conference
14 Md. Shazib Uddin and S. Kumar Energy and environmental analysis of domestic solar hot water system in Asian developing country context-Thailand Journal of Environmental Progress and Sustainable Energy 2015 Journal
15 Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal Electricity Consumption and Emission Analysis of Jute Product Manufacture Stages in Bangladesh: A Case Study International Conference on Mechanical Engineering (ICME)-2015, December 2015 Conference
16 Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed Construction and Performance Study of Underground Assisted Air Heating and Cooling System International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December 2015 Conference
17 Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed Design, Construction and Performance Test of a Solar Powered Prototype Vehicle International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi 2015 Conference
18 Md. Shazib Uddin and S. Kumar Energy, Emissions and Environmental Impact Analysis of Wind Turbine Using Life Cycle Assessment Technique Journal of Cleaner Production 2014 Journal
19 Mohammad Nurul Islam, Uzzal Hossain Joardder, SM Najmul Hoque and Md. Shazib Uddin A comparative study on pyrolysis for liquid oil from different biomass solid wastes Procedia Engineering 2013 Journal
20 Mollah Shahadat Hossain Lipu, Md. Shazib Uddin and Ahad Rahman Miah A Feasibility Study of Solar-Wind-Diesel Hybrid System in Rural and Remote Areas of Bangladesh International Journal of Renewable Energy Research 2013 Journal
21 Md. Shazib Uddin, S. Kumar and Amit Roy Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach Proceedings in the 15th annual paper meet, Dhaka. 2013 Conference
22 Md. Shazib Uddin, Mohammad Uzzal Hossain Joardder and Mohammad Nurul Islam Design and Construction of Fixed Bed Pyrolysis System and Plum Seed Pyrolysis for Bio-oil Production International Journal of Advanced Renewable Energy Research 2012 Journal
23 Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam The Benification of Waste Date seed as Bio-Oil and Activated Carbon by Pyrolysis Process Journal of Advanced Mechanical Engineering 2012 Journal
24 Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy “Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka 2012 Conference
25 M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan Pyrolysis of Pine Seed for Liquid Oil Production Proceedings of the 4th KKU International Engineering Conference (KKuience 2012),10-12 May, 2012, Thailand 2012 Conference
26 Mohammad Nurul Islam, Mohammad U.H.Joardder (Omar), S M Najmul Hoque and Md Uddin A Comparative Study on Pyrolysis for Liquid Oil from Different Biomass Solid Wastes. 5th BSME International Conference on Thermal Engineering, 2012, Dhaka 2012 Conference
27 Mohammad Uzzal Hossain Joardder, M.S.Uddin, Barun Kumar Das and Omar Faroque Renewable Energy Snapshot and Prospect in Bangladesh Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong 2011 Conference
28 Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy Effect of Engine Backpressure on the Performance and Emissions of a CI Engine Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh 2011 Conference
29 M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet 2011 Conference
30 Mohammad Rofiqul ISLAM, Hiroyuki HANIU, Mohammad Nurul ISLAM, and Md. Shazib Uddin Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology Journal of Thermal Science and Technology 2010 Journal
31 Md. N. Nabi, S. M. N. Hoque and Md. S. Uddin Production of Biodiesel in Bangladesh from Inedible Renewable Pithraj Oil (Aphanamixis polystachya) and Experimental Investigation of Methyl Esters as Biodiesel on CI Engine International Energy Journal (IEJ), RERIC 2010 Journal
32 Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader “Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna 2010 Conference
33 Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna 2010 Conference
34 Shahjada Mahmudul Hasan and Md. Shazib Uddin Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research Innovation and Education (CERIE), 11-13 January, 2010, Sylhet. 2010 Conference
35 Md. Mostafizur Rahman, Md. Shazib Uddin* and S.M. Najmul Hoque Preparation of Biodiesel from Waste Cook Oil and Performance and Emission Study of a Diesel Engine with Diesel-Biodiesel Blends Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet 2010 Conference
36 Murari Mohon Roy and Md. Shazib Uddin Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7) 2010 Conference
37 SM Najmul Hoque, Md. Nurun Nabi and Md. Shazib Uddin Prospect of Jatropha Curcas and Pithraj Cultivation in Bangladesh Journal of Engineering and Technology 2009 Journal
38 Mohammad Rofiqul Islam, Md. Shazib Uddin and Mohammad Nurul Islam Liquid Fuel Production from Sugarcane Bagasse by Fluidized Bed Pyrolysis Technology Journal of Engineering and Applied Science 2009 Journal
39 S.M. Najmul Hoque, Md. Shazib Uddin, Md. Nurun Nabi and Md. Mostafizur Rahman Biodiesel from Non-Edible Renewable Karamja Seed Oil and its Effect on DI Diesel Engine Combustion Proceedings in the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka 2008 Conference
  •  #6# G. A Member [AIT student union general assembly body during Master study at AIT]
  •  #5# Coordinator [AIT flood preparation committee during Master study at AIT]
  •  #4# Program Leader [International Event at AIT during Master study at AIT]
  •  #3# AIT research poster competition award, 2012 [AIT research poster competition held annually among wide variety of schools and field of study organized by student union. Awarded certificate and currency for 2nd position upon assessment by the external member and faculty members]
  •  #2# Green Valley award for outstanding performance (H.S.C preparation coaching Center, Rajshahi, 2003) [Awarded noble book and recognition for the outstanding performance (2nd position) in H. S. C preparation program assessed by the authority of coaching center. The number of performing student was around 4,000]
  •  #1# Center First award (S.S.C examination), 2001. [Awarded recognition by the school for outstanding result (First position) among the participating school in the S.S.C exam center]
  •  #4# Global Change Outstanding Scholarship, 2019 [Global change outstanding scholarship distribute among the top ranked HDR scholar within variety of schools and institutes of the university to create them for future research leader. Awarded certification/recognition and currency from the global change institute at the University]
  •  #3# Research Training Scholarship (RTP) for PhD degree, 2018 [Research training scholarship with higher level coverage includes tuition fee, living allowance and multi-family health coverage]
  •  #2# ADB-JSP (Japan) scholarship for Masters degree in Thailand (2011-2013) [Asian Development Bank-Japan Scholarship Program (ADB-JSP) awarded with extreme level of coverage includes visa and visa extension fee, round trip air fare, medical insurance, establishment allowance, book allowance, tuition fee, living allowance, research grant and extra luggage allowance during return]
  •  #1# Technical scholarship at undergraduate level (2005-2007) [Awarded the scholarship provided by the Government of Bangladesh for limited number good motivated students during undergraduate study for 3 years. Scholarship given based on the 1st year performance of the students]
  •  Deputy Sub-project Manager (DSPM) from 01/07/2014 To 30/06/2017 [Research with postgraduate students, research facility development, procurement, overall management and technical input, Project Title: Higher Educational Quality Enhancement Project (HEQEP) for improving postgraduate research facilities and producing quality postgraduates. Funded by World Bank through government of Bangladesh. Project Value: USD 2, 50,000.00]
  •  Member [Member, Institute of Engineers Bangladesh (IEB)]
  •  Teaching [The major teaching courses are Thermodynamics, Refrigeration and Air conditioning, Heat Transfer, Automobile Engineering, Power plant engineering, GIS application at Undergraduate level]
  •  Supervision [I have supervised more than 30 UG students and one PG students till now for their UG and PG academic and research]
  •  Former Assistant Provost [Student dormitory at RUET]
  •  Reviewer [Science publishing Group Journal, Journal of Cleaner Production, Environment, Development and Sustainability (Springer Journal) ]
  •  Research Assistant [One month research assistantship at AIT under Prof. Kumar ]
  •  Member [Organizing committee, Finance & Sponsor committee, Welcome & Reception committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2013, organized by faculty of Mechanical Engineering, RUET.]
  •  Secretary [Seat planning and management (6000 plus) for the undergraduate admission test of RUET (Session 2015-2016).]
  •  Secretary [Publication and advertisement committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME 2015 and ICMIME 2017), organized by faculty of Mechanical Engineering, RUET ]
  •  Secretary & Keynote speaker [National symposium on Alternative energy and energy efficiency in industry and service sector of Bangladesh, 2017]
  •  Former Vice President [Society of Automotive Engineers RUET (SAER), Bangladesh ]
Phd Students
IdNameThesis workCurrent Position
Masters Students
IdNameThesis workCurrent Position
100Tripti BiswasTechnical, Financial and Environmental aspect of Combined Cycle Power Plant in BangladeshNA
Undergraduate Students
IdNameThesis workCurrent Position
092105, 092088Md Saddam Hossain and Md Akhlasur Rahman KhanEnergy efficiency measures of Rajshahi University of Engineering & Technologysaddam.hossain81@yahoo.com
112027, 112033Md Fajle Rabbi and Md. Shahariar AhmedEmbodied Energy and Emission Analysis of Building Materials(Brick, Cement) Manufacture and Silica Extraction in Bangladeshrabbiboy631@gmail.com
082080, 082092Enamul Hasan and Md Mahmudul HasanEnergy auditing and investigation of potential reduction of energy on jute mill production line in Rajshahi Jute Mill, Rajshahi.anam_me08ruet@yahoo.com, mdmahmudul02@gmail.com
092003, 092004A. N. Faisal Ahmed and Sayeed AhmedAssessment of Energy Security Indicators in Bangladeshsayeedahmmed09@gmail.com, blaze.faisal@yahoo.com
112010, 112040SK Shamim Iqbal and Md Imrul Kais TalukdarAssessment of Energy consumption and CO2 Emission of Urban & RuralHousehold to Improve the Modern Energy Distributionshamimiqbal49@gmail.com
122009, 122010Saika Sharmin and Md. Nazmus SaiadatDesign and Construction of a Light Weight User Friendly Travelling Mosquito Netsadatbscruet@gmail.com, sharminsaika@gmail.com
112077, 112079Isahak Mohammad Habibulla and Nazmul HaqueEnergy Consumption and Carbon Footprint Assessment of Transport Vehicles in RUET & Rajshahi UniversityNA
122120, 122121A.Z.M. Waliur Rahman Sumon Kumar MondolDesign and Evaluation of a Solar Charging Station for Charging Battery Operated Three Wheeler Auto Rickshawwaliurrahman95joy@gmail.com
092093, 092104Md. Nazmus Sakib Khan and GM. Ahteshamul HaqueConstruction and Performance Study of a Underground Air Heating and Cooling SystemNA
0920, 0920Taniya Sultana and Mohimen LikhonDesign, Construction and Performance Study of a Thermal Mass Integrated Solar Air Heating SystemNA
102010, 102005Masud Parvez and Md. Enamul HaqueDesign, Construction and Performance Study of a Solar Dryer with Thermal Mass Integrated Green House Type Solar Air HeaterNA
102012,102052Raju Ahmed and Md.Mashudul HaquePerformance Study of a Coil Type Underground Heat Exchanger for Conditioning of Indoor Air and Life Cycle Energy& GHG Emission AnalysisNA
Activity Description
Computer skill
Skills on windows operating system, general software application, Photoshop etc.
Research software:
Word, excel, power point, LCA life cycle assessment software, GIS software, SPSS software (Introduction), Mat lab (Introduction), Ansys (Fluent), Python programming with CoolProp extension, COMSOL software, and other necessary software application required for the research and academic purposes.
Country Visited
Thailand (2011-2013); Saudi Arabia (45 days); India (1 week); A (Since 2018 )
Mini Project

Completed a mini project using GIS software during the study of GIS course 

Public Procurement Training

Public Procurement Training for the ongoing sub-project in the department of Mechanical Engineering, RUET  

Industrial Training

One month industrial training in BITAC, Dhaka, Bangladesh 

SPSS training

Attended SPSS software training organized by the student union at AIT 

LCA training

Attended LCA training program at AIT instructed by Dr.  Bohez

Power plant visit

Visited more than 10 power plants in Thailand during field visit of AIT energy field course work program

Industry visit

Visited More than 35 different types of industry during LCA research at AIT Masters study