Profile

Professor Dr. Md. Shamimur Rahman

প্রফেসর ড. মোঃ শামীমুর রহমান

Professor

  •   Head of GCE
  •  Room No:  203, GCE Building
  •  Phone:   880-1713228532 , 880-1532092257
  •  PABX:   155
  •  Email:   shamimurgce@gmail.com
  • rahman@gce.ruet.ac.bd
Dr. Md. Shamimur Rahman has completed the Ph.D degree on Material Science and Engineering from The school of Intelligent Structure and Mechanics System Engineering of The University of Tokushima, Japan. He has visited a several country like England, Germany, Japan, India, China, South Korea and Malaysia regarding his research work. Mr. Rahman was invited by Central Glass and Ceramic Research Institute of West Bengal, India as a Visiting Professor. He is playing an important role on this field of research all over the country. He is the founder head of the Glass and Ceramic Engineering Department which has been opened on 2009 by The Government interest. He joined in the mechanical engineering department as a lecturer in 1999. Basically he is graduated on mechanical engineering. Now he is carrying out his research work on this prosperous field of Glass and Ceramic according to his research field. He has published a number of international journals and international conference research papers. Also a number of papers are in pipeline for publishing.
Field of Research
  •  Fatigue and Fracture of Materials
  •  Coating and Thin films, Bio-ceramics, Surface Engineering

  •  First Joined: 24th Jun, 1999
  •      Dept. of Mechanical Engineering

Position

Book / Book Chapter
1
Journal Articles
14
Conference Papers
19
SL Authors Title Publisher Details Publication Year Type
1 M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films Journal of Physics Communications 3 (10), 105007 2019 Journal
2 M.Humayan Kabir, M N A Chowdhury and M.S.Rahman Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique 5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019) 2019 Conference
3 M.A. Kaiyum; S. Rahman Investigation of Physical Properties of Locally (Rajshahi, Bangladesh) Available Clay Journal of Advances in Geotechnical Engineering: 2 pp. 1-5 (3) 2019 Journal
4 Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162 2019 Journal
5 M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere Chinese journal of physics 56 (5), 2275-2284) 2018 Journal
6 T. Zaman, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman Evolution and characterization of eggshell as a potential candidate of raw material Ceramica 64(370):236-241 2018 Journal
7 Shamimur Rahman, Abdullah Al Mahmood Solution for Raw Material Crisis in Bricks and Tiles Manufacturing Industries International Journal of Latest Trends in Engineering and Technology, Vol. 8, No. 2, 2017, pp. 120-127 2017 Journal
8 Abdullah Al Mahmood and Shamimur Rahman Ceramic Raw Materials - Different Clays LAP LAMBERT Academic Publishing, ISBN-13: 978-3-330-05396-0, ISBN-10: 3330053968, EAN: 9783330053960 2017 Book
9 Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Aminul Islam Effect of Al Doping on Thickness, Optical, Morphological and Structural Properties of TiO2 Thin Film Prepared by Spin Coating Method Journal of Thin Films Research, Volume 1,Issue 1,2017 Pages 17-19 2017 Journal
10 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48 2016 Journal
11 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48 2016 Journal
12 Md. Shamimur Rahman and Md. Abdullah Al Mahmood Crack initiation and fatigue behaviour evaluation of ceramic film deposited on Ti-6Al-4V alloy International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 246-249 2014 Journal
13 Md. Shamimur Rahman and Md. Abdullah Al Mahmood Effect of substrate bias voltage on fretting fatigue behaviour of ceramic film deposited on Ti-6Al-4V alloy International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 250-253 2014 Journal
14 M. A. A. Mahmood, T. Zaman, M. S. Rahman and M. J. Abedin Using Analytical Hierarchy Process for Optimization of Gas Metal Arc Welding (GMAW) Parameters International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2014) 2014 Conference
15 Md. Forhad Ibne Al Imam, Md. Shamimur Rahman, Md. Abdullah Al Mahmood Influence of Heat Treatment on Fatigue and Fracture Behavior of Aluminium Alloys International Conference on Engineering Research, Innovation and Education (ICERIE 2013) 2013 Conference
16 M. S. Rahman, M. A. A. Mahmood, T. Zaman, and M. J. Abedin Optimization of Process Parameters in MIG Welding by Using Analytical Hierarchy Process International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013) 2013 Conference
17 M. S. Rahman, M. A. A. Mahmood, and T. Zaman Potential Use of the Clay from the Dead River Isamati International Conference on Climate Change Impact and Adaptation (I3CIA) Center for Climate Change and Sustainability Research (3CSR) 2013 Conference
18 M. A. A. Mahmood, M. S. Rahman, T. Zaman, and M. B. Islam Ceramics in Bangladesh: Recent Evolution and Future Prospect International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013) 2013 Conference
19 M. A. A. Mahmood, M. S. Rahman, T. Zaman Comparison of Welding Effect on Tensile Strength and Hardness of Mild Steel and Cast Iron International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013) 2013 Conference
20 M. A. A. Mahmood, M. S. Rahman and Tasmia Zaman Ceramics in Bangladesh: Its Recent Evolution and Future Prospect International Conference on Mechanical, Industrial and Materials Engineering (ICMIME-2013) 2013 Conference
21 Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys International Conference on Engineering Research, Innovation and Education (ICERIE-2013) 2013 Conference
22 Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys International Conference on Engineering Research, Innovation and Education (ICERIE-2013) 2013 Conference
23 M.S. Rahman, S. Tanimoto, D Yonekura and R. Murakami Influence of the Substrate Bias Voltage on Fretting Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy International Journal of Modern Physics B, Vol. 25, issue 12, pp. 1567-1576 2011 Journal
24 Md. Shamimur Rahman, Takeshi Katsuma, Daisuke Yonekura, Ri-ichi Murakami Evaluation of Crack Initiation and Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy International Journal of Modern Physics B, Vol. 24, Issue15-16(2010), pp. 2502-2506 2010 Journal
25 Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, and Ri-ichi Murakami Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy MSEC_ICM&P2008-72441, pp. 169-174; 2009 Journal
26 M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi Emission Characteristics of a DI Diesel Engine with Bio-fuel International Conference on Mechanical Engineering' 2005, (ICME2005) 28-30 December 2005, Dhaka 2005 Conference
27 M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi Investigation of Exhaust Emission of a DI Diesel Engine with Biodiesel 5th International Mechanical Engineering Conference and 10th Annual Paper Meet 2004 Conference
28 M.S Rahman, M.N. Nabi, and M.R.A. Beg Performance Study of A Diesel Engine with Diesel-Vegetable Oil Blends as Alternative Fuel 2nd BSME-ASME International conference on Thermal Engineering, 2-4 January, 2004, Dhaka 2004 Conference
29 M.S Rahman, M.R.A. Beg, and M.N. Nabi Performance Study of A Diesel Engine with Esterified Vegetable Oil 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, 29-31 December, 2004, Dhaka, Bangladesh 2004 Conference
30 Md. Nurun Nabi, Mhia Md. Zaglul Shahadat , Md. Shamimur Rahman, and Mohd. Rafiqul Alam Beg Behavior of Diesel Combustion and Exhaust Emission with Neat Diesel Fuel and Diesel-Biodiesel Blends SAE International conference, October 27-31, 2004 Paper No. 2004-01-3034, pp. 1-8. USA 2004 Conference
31 Nurun Nabi, Shamimur Rahman, and Rafiqul Alam Beg Fundamental Properties of Different Vegetable Oils Available in Bangladesh SAE International conference, Pittsburgh, Pennsylvania USA, October 27-30, 2003 2003 Conference
32 Md. Nurun Nabi, Md. Shamimur Rahman, Mohd. Rafiqul Alam Beg, Md. Sakhawat Hossain, and Md. Sazzadul Faruki Characterization of Different Vegetable Oils Available in Bangladesh 3rd International Conference of Mechanical Engineers (ICME) and 8th Annual Paper Meet, 20-22 March, 2003, Dhaka. Paper no. 10, pp. 67-76 2003 Conference
33 Murari Mohon Roy and Md. Shamimur Rahman Improvement in Odor Assessment procedure in DI Diesel Engines International conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh. pp. 544-551 2002 Conference
34 R.A. Beg, M.S. Rahman, P.K. Bose, and B.B. Ghosh Performance Studies on Semi-Adiabatic Diesel Engine Using Vegetable Oil as Fuel SAE International conference, San Diego, California USA, October 21-24, 2002. Paper no. 2002-01-2692 2002 Conference
Phd Students
IdNameThesis workCurrent Position
Masters Students
IdNameThesis workCurrent Position
Undergraduate Students
IdNameThesis workCurrent Position
Activity Description