Books (3)
- 1. Mahadi Hasan Masud, Azharul Karim, Anan Ashrabi Ananno, and Asif Ahmed; "Sustainable Food Drying Techniques in Developing Countries: Prospects and Challenges", Springer, 2020
- 2. Mohammad U.H. Joardder, Mahadi Hasan Masud; "Food Preservation in Developing Countries: Challenges and Solutions", Springer, 2019
- 3. Mohammad U.H. Joardder, Monjur Mourshed, Mahadi Hasan Masud; "State of Bound Water: Measurement and Significance in Food Processing", Springer, 2019
Book Chapters (2)
- 1. M.U.H.Joardder, P.K.Halder, M.A.Rahim, M.H.Masud; "Solar Pyrolysis: Converting Waste Into Asset Using Solar Energy", Elsevier, 2017
- 2. Mohammad Uzzal Hossain Joardder, Mahadi Hasan Masud, Azharul Karim; "Relationship between Intermittency of Drying, Microstructural Changes, and Food Quality", Taylor and Fransis (CRC Press), 2017
Journal Articles (26)
- 1. Mahadi Hasan Masud, Anan Ashrabi Ananno, Nufile Ahmed, Peter Dabnichki, K.N.Salehin; "Experimental investigation of a novel waste heat based food drying system", Journal of Food Engineering (Elsevier), 2020
- 2. Mahadi Hasan Masud, Md Nuruzzaman, Raju Ahmed, Anan Ashrabi Ananno, and A. N. M. Amanullah Tomal; "Renewable energy in Bangladesh: current situation and future prospect", International Journal of Sustainable Energy (Taylor & Francis), 2020
- 3. A A. Ananno, Mahadi Hasan Masud, Peter Dabnichki, A. Ahmed; "Design and numerical analysis of a hybrid geothermal PCM flat plate solar collector dryer for developing countries", Solar Energy (Elsevier), 2020
- 4. Mohammad UH Joardder, Mahadi Hasan Masud, Shayban Nasif, Jakaria Abed Plabon, and Sagit Hasan Chaklader; "Development and performance test of an innovative solar derived intermittent microwave convective food dryer", AIP Conference Proceedings, 2019
- 5. M. Mourshed, P. C. Karmaker, A. Ahmed, and Mahadi Hasan Masud; "Performance enhancement of solar PV/T by using glycerin as additive", AIP Conference Proceedings, 2019
- 6. Mahadi Hasan Masud, T. Islam, M. U. H. Joardder, A. A. Ananno & P. Dabnichki; "CFD analysis of a tube-in-tube heat exchanger to recover waste heat for food drying", International Journal of Energy and Water Resources (Springer), 2019
- 7. Mahadi Hasan Masud, Mohammad U.H. Joardder, and Azharul Karim; "Effect of hysteresis phenomena of cellular plant-based food materials on convection drying kinetics", Drying Technology (Taylor & Francis), 2019
- 8. Wahedul Islam, Monjur Mourshed, Mahadi Hasna Masud, Shariful Islam Sozal,Sifat Bin Sabur; "Prospects of non-edible neem (Azadirachta indica) oil in Bangladesh: performance and emission evaluation in a direct injection diesel engine", International Journal of Ambient Energy (Taylor & Francis), 2019
- 9. Mahadi Hasan Masud, Anan Ashrabi Ananno, Amit M. E. Arefin, Raju Ahamed, Pronob Das, Mohammad U. H. Joardder; "Perspective of biomass energy conversion in Bangladesh", Clean Technologies and Environmental Policy (Springer), 2019
- 10. Mahadi Hasan Masud, Raju Ahamed, Mohammad U. H. Joardder & Mehide Hasan; "Mathematical model of heat transfer and feasibility test of improved cooking stoves in Bangladesh", International Journal of Ambient Energy (Taylor & Francis), 2019
- 11. Mahadi Hasan Masud, Wasim Akram, Asif Ahmed, Anan Ashrabi Ananno, Monjur Mourshed, Muntakhimoon Hasan & Mohammad Uzzal Hossain Joardder; "Towards the effective E-waste management in Bangladesh: a review", Environmental Science and Pollution Research (Springer), 2019
- 12. Mahadi Hasan Masud, Raju Ahamed, M. Mourshed, M. Y. Hossan & M. A. Hossain; "Development and performance test of a low-cost hybrid solar air heater", International Journal of Ambient Energy (Taylor & Francis), 2019
- 13. Uddin, M.S. and Mahadi Hasan Masud; "A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus", International Journal of Advanced Renewable Energy Research, 2018
- 14. Islam, M.T., Arefin, A.M.E., Mahadi Hasan Masud, Mourshed, M.; "The Effect of Reynolds No. on the Performance of NACA 2412", AIP Conference Proceedings, 2018
- 15. Mahadi Hasan Masud, Monjur Mourshed, Amit Md. Estiaque Arefin, Md. Tariqul Islam & Md. Shamim Akhter; "Inhalation risk of indoor aerosol spray products commercially available in Bangladesh", International Journal of Environmental Studies (Taylor & Francis), 2018
- 16. Mohammad U.H. Joardder, Soumya Mandal, Mahadi Hasan Masud; "Proposal of a solar storage system for plant-based food materials in Bangladesh", International Journal of Ambient Energy (Taylor & Francis), 2018
- 17. Mahadi Hasan Masud, Md. Shamim Akhter, Sadequl Islam, Abdul Mojid Parvej, Sazzad Mahmud; "Design, construction and performance study of a solar assisted Tri-cycle", PERIODICA POLYTECHNICA MECHANICAL ENGINEERING, 2017
- 18. Mahadi Hasan Masud, Naim-Ul-Hasan, Arefin, A.M.E. and Joardder, M.U.,; "Design modification of airfoil by integrating sinusoidal leading edge and dimpled surface.", AIP Conference Proceedings, 2017
- 19. Mustafi, N.N., Mourshed, M., Mahadi Hasan Masud, Hossain, M.S. and Kamal,; "Feasibility test on green energy harvesting from physical exercise devices.", AIP Conference Proceedings, 2017
- 20. Haque, M.E., Islam, M.R., Mahadi Hasan Masud, Ferdous, J. and Haniu, H.,; "Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh.", AIP Conference Proceedings, 2017
- 21. Mourshed, M., Mahadi Hasan Masud, Islam, M.T.,; "Numerical investigation of the stress development in the involute spur gear under static load condition", AIP Conference Proceedings, 2017
- 22. Monjur Mourshed, Mahadi Hasan Masud, Fazlur Rashid, Mohammad U.H. Joardder; "Towards the effective plastic waste management in Bangladesh: a review", Environmental Science and Pollution Research (Springer), 2017
- 23. Amit Md. EstiaqueArefin, Mahadi Hasan Masud, Mohammad U.H.Joardder, Md. ShamimAkhter; "A monodisperse-aerosol generation system: Design, fabrication and performance", Particuology (Elsevier), 2017
- 24. Nabi, A.R., Mahadi Hasan Masud, and Alam, Q.I.,; "Purification of TPO (Tire Pyrolytic Oil) and its use in diesel engine", IOSR Journal of Engineering, 4(3), 2014
- 25. Mahadi Hasan Masud, Noor, M.M. and Akhter, M.S.,; "Design and Construction of a Wind Tunnel with Microcontroller based Isokinetic Probe for Sampling Aerosol Particle.", Global Journal of Researches in Engineering, 2014
- 26. Mahadi Hasan Masud, Shakib, M.N. and Rokonuzzaman, M.; "Study of Environmental Impacts of the Barapukuria Thermal Power Plant of Bangladesh", Global Journal of Researches in Engineering, 2014
Conference Papers (8)
- 1. Mahadi Hasan Masud , Md. Tariqul Islam, Anan Ashrabi Ananno, Md. Asif Ahmed; "Towards a zero-energy based food drying system by utilizing the waste heat", International Conference on Engineering Research and Education School of Applied sciences & Technology, 25-27 January, SUST, Sylhet, Bangladesh, 2018
- 2. Mahadi Hasan Masud, Joardder, M.U.H., Islam, M.T., Hasan, M., Ahmed, M.; "Feasibility of utilizing waste heat in drying of plant-based food materials", International Conference on Mechanical, Industrial and Materials Engineering, 28-30 December, RUET, Rajshahi, Bangladesh, 2017
- 3. Arefin, A.M.E.,Mahadi Hasan Masud, Joardder, M.U., Mourshed, M., Hasan, N., and Rashid. F.,; "Waste heat recovery systems for internal combustion engines: A review", 1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, At Military Institute of Science and Technology, Dhaka, Bangladesh, 2017
- 4. Mourshed, M., Rashid, F., Sarker, A., Hoque, M.E. and Masud, M.H.,; "Single Degree Motion Control Using Magnetic Levitation System", 1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, Military Institute of Science and Technology, Dhaka, Bangladesh, 2017
- 5. Uddin, M.S., Mandal, S., Masud, M.H., and Mourshed, M.,; "Design, Construction and Performance Test of a Solar Powered Prototype Vehicle", nternational Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh, 2015
- 6. Uddin, M.S., Masud, M.H., Mandal, S., and Mourshed, M.; "Construction and Performance Study of Underground Assisted Air Heating and Cooling System", International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh, 2015
- 7. Newaj, N. and Masud, M.H.; "Utilization of Waste Plastic to Save the Environment", International Conference on Mechanical, Industrial and Energy Engineering, 25-26 December, khulna, Bangladesh, 2014
- 8. Faroque,O., Mahadi Hasan Masud, Joardder, M.U.H,; "Better Energy Utilization: A Solution of Power Crisis in Bangladesh", International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh, 2013